SE Error Codes

NOTE

This topic describes only module-specific error codes. For details about universal error codes, see Universal Error Codes.

3300101 Abnormal SE Service Status

Error Message

IllegalStateError, an attempt is made to use an SE session that has been closed.

Description

The SecureElement (SE) service is abnormal.

Possible Causes

  1. The SE service is disconnected.

Solution

  1. Close the SE service.

  2. Set up a connection with the SE service again.

3300102 No Such SE

Error Message

NoSuchElementError, the AID on the SE is not available or cannot be selected.

Description

The SE is unavailable.

Possible Causes

  1. Communication with the SE service is abnormal.
  2. Communication of the SE chip is abnormal.

Solution

  1. Close the SE service and set up a connection with the SE service again.
  2. Restart the device.

3300103 Failed to Obtain the Access Rule

Error Message

SecurityError, the calling application cannot be granted access to this AID or the default applet on this session.

Description

The access rule cannot be obtained.

Possible Causes

  1. There is no access rule for the application on the SE.

Solution

  1. Write correct access rules to the SE.
  2. Close the SE service and set up a connection with the SE service again.

3300104 SE Chip I/O Exception

Error Message

IOError, there is a communication problem to the reader or the SE.

Description

The I/O of the SE chip is abnormal.

Possible Causes

  1. The communication with the SE chip is abnormal.
  2. The SE chip is abnormal.

Solution

  1. Close the SE service and set up a connection with the SE service again.

  2. Restart the device.