oom

Command Function

This command is used to query and set the low memory threshold and the PageCache reclaim threshold.

Syntax

oom

oom -i [interval]

oom -m [mem byte]

oom -r [mem byte]

oom -h | --help

Parameters

Table 1 Parameter description

Usage Guidelines

If no parameter is specified, this command displays the current OOM configuration.

NOTE
If the system memory is insufficient, the system displays a message indicating the insufficiency.

Example

Run the following commands:

• oom
• oom -i 100

Output

Example 1: The OOM configuration is displayed by default.

OHOS:/$ oom
[oom] oom loop task status: enabled
      oom low memory threshold: 0x80000(byte)
      oom reclaim memory threshold: 0x500000(byte)
      oom check interval: 100(microsecond)

Information displayed when the system memory is insufficient:

T:20 Enter:IT MEM 00M 001
[oom] OS is in low memory state
total physical memory: 0x1bcf000(byte), used: 0x1b50000(byte) ,free: 0x7f000(byte), low memory threshold: 0x80000(byte)
[oom] candidate victim process init pid: 1, actual phy mem byte:82602
[oom] candidate victim process shell pid: 3, actual phy mem byte:14950e
[oom] candidate victim process testsuits app pid: 4, actual phy mem byte:1334598
[oom] candidate victim process UserProcess12 pid: 12, actual phy mem byte:25951558
[oom] max phy mem used process UserProcess12 pid: 12, actual phy mem 25951558
################excFrom: User!####################
data abort fsr:0x817, far:0x225af000
Abort caused by a write instruction. Translation fault, page
excType: data abort
processName    = UserProcess12
processID      = 12
process aspace = 0х01000000 -> 0х3f000000
taskName       = threado
taskID         = 22
task user stack = 0х20e17000 -> 0х20e21000
pc   = 0x93969dc in /usr/bin/testsuits app ---> 0x19f9dc
ulr  = 0x93969cc in /usr/bin/testsuits app ---> 0x19f9cc
usp  = 0х20e20c68fp = 0x20e20c8c
R0   = 0х20e35000
R1   = 0x225af000
R2   = 0x0
R3   = 0х28e35000
R4   = 0х0
R5   = 0х9500000
R6   = 0х14
R7   = 0х97822c4
R8   = 0x970cfa8
R9   = 0x9090909
R10  = 0xa0a0a0a
R11  = 0x20e20c8c
R12  = 0х0
CPSR = 0х80000010
***backtrace beain***
traceback 0 -- lr = 0x9242e1c fp = 0х20e20cc4 lr in /usr/bin/testsuits apr 0x4be1c
traceback 1 -- 1r = 0х92430cc fp = 0x20e20cdc lr in /usr/bin/testsuits app --> 0x4c0cc
traceback 2 -- 1r = 0x9396ab0 fp = 0x20e20cec lr in /usr/bin/testsuits app -> 0х19fab0
traceback 3 -- lr = 0x9393eb4 fp = 0x20e20cf4 lr in /usr/bin/testsuits ap --> 0x19ceb4
traceback 4 -- lr = 0x92427d4 fp = 0x20e20d44 lr in /usr/bin/testsuits app --> 0x4b7d4
traceback 5 -- 1r = 0x20c4df50 fp = 0хb0b0b0b 1r in /1ib/libc.so - -> 0x62f50

Example 2: The OOM check interval is set to 100 ms.

OHOS:/$ oom -i 100
[oom] set oom check interval (100)ms successful

Table 2 Output description