Telephony Error Codes

NOTE

This topic describes only module-specific error codes. For details about universal error codes, see Universal Error Codes.

8300001 Input Parameter Value Out of Range

Error Message

The input parameter value is out of range.

Description

This error code is reported if the value of the input parameter (for example, slotId) is not within the valid range. In this case, the API call will fail and the corresponding operation cannot be performed.

Possible Causes

The input parameter value is invalid.

Procedure

Enter a valid parameter value.

8300002 Service Connection Error

Error Message

Operation failed. Cannot connect to service.

Description

This error code is reported if the attempt to connect to a service fails.

Possible Causes

Service startup or IPC connection has failed.

Procedure

Operation error. Try again later.

8300003 System Internal Error

Error Message

System internal error.

Description

This error code is reported if an internal system error occurs.

Possible Causes

The possible cause is that data read/write has failed because the network is abnormal.

Procedure

Operation error. Try again later.

8300004 SIM Card Not Detected

Error Message

Do not have sim card.

Description

This error code is reported if no SIM card is detected.

Possible Causes

No SIM card is inserted or the SIM card is not properly inserted.

Procedure

Insert the SIM card or remove and insert the SIM card again.

8300999 Unknown Error

Error Message

Unknown error code.

Description

This error code is reported if an unknown error occurs.

Possible Causes

An unexpected error occurs in the system. The possible cause is that error codes of the bottom layer are not within the processing range.

Procedure

Operation error. Try again later.

8301001 SIM Card Not Activated

Error Message

SIM card is not activated.

Description

This error code is reported if the SIM card is not activated.

Possible Causes

The SIM card is not activated.

Procedure

Activate the SIM card.

8301002 Failed to Read or Update SIM Card Data

Error Message

SIM card operation error.

Description

This error code is reported if the attempt to read or update SIM card data has failed.

Possible Causes

The SIM card does not support the operation, or the SIM card is damaged.

Procedure

Contact the SIM card supplier, or replace the SIM card.

8301003 Incorrect SIM Card Configuration

Error Message

Operator config error.

Description

This error code is reported if the SIM card configuration is incorrect.

Possible Causes

The configuration file delivered with the SIM card is not properly preconfigured.

Procedure

Check whether the correct SIM card is inserted.

8401001 Failed to Connect to the UT

Error Message

UT is not connected.

Description

This error code is reported if the UT is not connected.

Possible Causes

The current carrier does not support sending of UT requests over a Wi-Fi network, but the phone is actually connected to the Wi-Fi network.

Procedure

Disconnect the Wi-Fi connection, and send a new UT request.